​

PVC MANUFACTURE INFORMATION

The beds of our units are produced in UK manufactured 610 gramme per square metre, fire-retardant, nylon based PVC which provides the most flexible and hardwearing base for an inflatable unit. This PVC is available in a large range of colours. Sample swatches and the PVC data sheet provided by the manufacturer can be provided.

 

The PVC complies with the flammability requirements of BS5867:1980 Part 2 Type B as is usually required.

 

Roofs and shower covers use a more lightweight material as they do not need to be quite as durable.

 

Inflatables can also be manufactured from alternative materials where appropriate.

 

WEBBING

 

All bounce beds are re-enforced using 2" Polyester webbing which is Flame retardant and UV treated.

 

STITCHING

 

The PVC is joined on a twin needle lockstitch machine providing a hardwearing and robust seam. The thread is bonded Nylon Twist produced from continuous filament Nylon. The manufacturer confirms that this thread is manufactured to ENISO 2060 and 2062.

 

ZIPS/HOOK AND LOOP

 

Commercial zips with a PVC Hook and Loop flap for protection are inserted on the bed wall for easy and fast deflation. This reduces the time spent in deflation and increases ease of use.

 

PAINT

 

The specialist paint used in any PVC artwork is manufactured in accordance with EN71 - Toy regulations. An independent test report with analysis confirming adherence to this specification may be provided.

 

FAN

 

Unless specified otherwise, the units would be supplied with a Gibbons 240 Volt 50 Hz 1.5 Horse power fan. The fans have a two year guarantee inclusive of parts and labour.

 

GUARANTEE

 

All our inflatables are provided (as standard) with a 2 year fair wear and tear guarantee with the unit to be returned to the factory for repair at the Customer's own expense. This cover includes any parts and labour within the stated guarantee period. The guarantee on specialist inflatables may vary.

 

DELIVERY

 

Inflatables are manufactured and delivered within an agreed timescale following receipt of formal order.

 

As Registered Play Inspectors with PIPA you can be sure that your product will comply with, or exceed, all relevant legislation.

 

With an Inflatable provided by Inflatable World Leisure you can be assured of excellence in design, manufacture and after sales service.

 

 

REPAIRS

 

We recommend preventative maintenance and small regular repairs to prolong the life of your inflatables and keep them looking their best.

 

Please call us to arrange a repair or send us an email with a photograph showing the damage and we will get back to you letting you know if repair is possible and the approximate cost.

 

We generally offer in- house repairs however if you have lots of inflatables or are not able to arrange transport we may be able to arrange repair and testing on your site.

 

Please note that although testing and repair is best arranged "off-season" we will always try to ensure that repairs are carried out as soon as required so that you do not miss a booking.

 

When a repair is booked into our factory we will generally try to repair it whilst you wait to cut down on transportation costs. Where inflatables are used daily, for your peace of mind, we can set up an Annual Maintenance Contract which covers the cost of an annual test and repair service and any unexpected repairs that occur during the year.

 

We can carry out repairs both large and small.

 

Typical large repairs: We can replace whole Slide sheets and steps on large slides and replace dull or torn rain covers on A-Frames and Bounce and Slides.

 

Typical small maintenance repairs: Replace torn or missing Anchor points, Repair "popped" stitching, re-stitch and touch up artwork on Crashmats.